1
/
of
15
5 mm Path JGS1 Quartz Sealed Screw-Top Cuvette, Optical-Contact Fused, 2 or 4 Clear Windows, Large / Small Screw Cap, 200–2500 nm
5 mm Path JGS1 Quartz Sealed Screw-Top Cuvette, Optical-Contact Fused, 2 or 4 Clear Windows, Large / Small Screw Cap, 200–2500 nm
Regular price
$109.00 USD
Regular price
Sale price
$109.00 USD
Shipping calculated at checkout.
5 mm Path JGS1 Quartz Sealed Screw-Top Cuvette
Short-path quartz cuvettes with an integrated threaded neck and screw cap for leak-free, evaporation-resistant measurements. The body is made by optical-contact fusing, so there is no adhesive layer that could contaminate samples. Available with two clear windows for absorbance or four clear windows for fluorescence, with a large or small screw cap and round or flat bottom.
Overview
- Path length: 5 mm.
- Material: JGS1 UV-grade fused quartz, usable from 200 to 2500 nm.
- Transmittance: above 80% (about 83% typical), matched-pair error of 0.5% or less.
- Seal: threaded neck with screw cap prevents leakage and evaporation.
Key Features
- Adhesive-free construction: optical-contact fused body resists acids, solvents and heat.
- Sealed sample: suitable for volatile solvents, air-sensitive samples and long kinetic runs.
- Two window options: 2 clear windows for UV-Vis absorbance; 4 clear windows for fluorescence.
- Cap and bottom options: large or small screw cap; round or flat bottom.
Model Comparison
| Model | Clear windows | Screw cap | Bottom | Typical use |
|---|---|---|---|---|
| 2W, large cap | 2 | Large | Round | Absorbance, easy filling |
| 2W, small cap | 2 | Small | Round | Absorbance, low dead volume |
| 4W, large cap | 4 | Large | Round | Fluorescence, easy filling |
| 4W, small cap | 4 | Small | Round | Fluorescence |
| 4W, small cap, flat bottom | 4 | Small | Flat | Fluorescence, stable standing |
Common Questions
When should I use a screw-top cuvette? Use it when the sample is volatile, toxic, oxygen-sensitive or must be measured over a long time, since the cap keeps the contents sealed.
2 or 4 windows? Absorbance needs only two clear windows in the light path. Fluorescence detection at 90° needs all four sides clear.
Use and Care
- Tighten the cap gently; do not overtighten.
- Clean with ultrapure water, ethanol or a quartz cleaning solution; avoid hydrofluoric acid and hot strong alkali.
- Do not wipe optical windows with hard or abrasive materials.
For research and laboratory use only.
Share
