Purcise PLE Polyethersulfone (PES) 0.45 μm Bricap HT (High Area) Capsule Filter Prefiltration. Sold in the configuration options listed below; specifications are as published by the manufacturer.
Specifications
Filter Format: Bricap™ HT Capsule Filter
Scale: Production Scale
Filtration Area: 1.04 m², 2.08 m², 3.12 m²
Pore Size: 0.45 μm (final-filter)
Pre-filter: 0.8 μm
Bubble Point (per 0.55 m²): ≥0.27 MPa at 20 °C, water wetted, air
Membrane Material: Polyethersulfone (PES)
Support Fleece: Polypropylene (PP)
Housing: Polypropylene (PP)
O-ring / Seal: Silicone
Max. Differential Pressure (Forward): 0.55 MPa at 25 °C0.1 MPa at 80 °C
Max. Differential Pressure (Reverse): 0.21 MPa at 25 °C
Bacterial Retention: 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) according to ASTM F838
Bacterial Endotoxin: Endotoxin Limit of WFI System<0.25 EU/mL with the Limulus Amebocyte Lysate (LAL), USP <85>
Non-Fiber Releasing: The products meet the criteria as defined in 21 CFR 210.3(b)(6)
Sterilization Method: Autoclavable: 25 cycles for 30 min at 130 °C (SIP not compatible)Gamma Compatible: can be sterilized by gamma irradiation or autoclaved 5 cycles for 60 min at 126 °CPre-sterilized: by gamma irradiation at 25–45 kGyPre-sterilized: by autoclaved packed in cleansteam bag
