1
/
of
16
Sealed 10 mm Quartz Cuvette with Threaded Cap, 2 or 4 Clear Windows
Sealed 10 mm Quartz Cuvette with Threaded Cap, 2 or 4 Clear Windows
Regular price
$60.00 USD
Regular price
Sale price
$60.00 USD
Shipping calculated at checkout.
Sealed 10 mm Quartz Cuvette with Threaded Cap
High-purity quartz cuvettes with a standard 10 mm light path and an internally threaded neck that takes a sealing cap. The sealed design limits leakage, evaporation and dust ingress, making these cells well suited to volatile solvents, small or precious samples, and measurements that run over long periods. Choose two clear windows for routine UV-Vis absorbance or four clear windows for fluorescence and multi-angle work.
Overview
- Material: high-purity fused quartz with high UV-Vis transmittance and low stray light.
- Path length: 10 mm standard, fits most spectrophotometers and fluorometers.
- Windows: 2 clear (absorbance) or 4 clear (fluorescence).
- Construction: frit-sintered quartz or optical contact (fully fused, no adhesive).
- Seal: internal thread with screw-on sealing cap; cap styles vary by model.
- Optical performance: pair deviation within 0.3%.
Model Comparison
| Model | Construction | Clear windows | Best for |
|---|---|---|---|
| Frit-sintered, 2 windows | Glass-frit fused | 2 | Routine sealed UV-Vis absorbance |
| Frit-sintered, 4 windows | Glass-frit fused | 4 | Routine fluorescence work |
| Optical contact, 2 windows | Fully fused, no adhesive | 2 | High-precision absorbance, harsh solvents |
| Optical contact, 4 windows | Fully fused, no adhesive | 4 | High-precision fluorescence |
| Optical contact, 4 windows, slit | Fully fused, internal slit | 4 | Specialized fluorescence setups needing a restricted beam |
Key Features
- Leak-resistant seal: the threaded cap reduces volatilization and keeps samples clean.
- Two process grades: frit-sintered for routine experiments, optical contact for precision research.
- Heat and chemical resistance: quartz resists high temperature, acids and alkalis and does not deform easily.
Common Questions
2 or 4 windows? Absorbance measurements only need light to pass straight through, so two clear windows are enough. Fluorescence is detected at 90° to the excitation beam, so all four sides must be clear.
Use and Care
- Rinse with pure water or a suitable cleaning solution before and after use; avoid rough tissues or cloths.
- Tighten the cap carefully and handle with care.
- Avoid highly corrosive or extremely hot liquids.
- Run a blank calibration before first use; clean stained or fogged windows before reuse.
- Dry thoroughly and store in a dry, dust-free, dark place away from pressure and impact.
For research and laboratory use only.
Share
