Purcise SLE Polyethersulfone (PES) 0.2 μm Sterilizing-Grade Brisip SP3 Capsule Filters Steam-In-Place (SIP)

Purcise SLE Polyethersulfone (PES) 0.2 μm Sterilizing-Grade Brisip SP3 Capsule Filters Steam-In-Place (SIP). Sold in the configuration options listed below; specifications are as published by the manufacturer.

Specifications

• Filter Format: Bricap™ SP3 Capsule Filter
• Scale: Production Scale
• Filtration Area: 0.15 m²
• Pore Size: 0.2 μm (final-filter)
• Pre-filter: 0.45 μm
• Bubble Point (per 0.55 m²): ≥0.39 MPa at 20 °C, water wetted, air
• Membrane Material: Polyethersulfone (PES)
• Support Fleece: Polypropylene (PP)
• Port Insert: 316L Stainless Steel
• Housing: Polyetherimide (PEI)
• O-ring / Seal: Silicone
• Max. Differential Pressure (Forward): 0.55 MPa at 25 °C0.1 MPa at 80 °C
• Max. Differential Pressure (Reverse): 0.21 MPa at 25 °C
• Compliance: USP <788> Particulate MatterUSP <87> CytotoxicityUSP <88> Biological ReactivityFDA Indirect Food Additives, 21 CFR 177-182ADCF Materials
• Bacterial Retention: 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) according to ASTM F838
• Bacterial Endotoxin: Endotoxin Limit of WFI System<0.25 EU/mL with the Limulus Amebocyte Lysate (LAL), USP <85>
• Non-Fiber Releasing: The products meet the criteria as defined in 21 CFR 210.3(b)(6)
• Delivery Condition: Non-sterile
• Sterilization Method: Autoclavable: 10 cycles for 30 min at 131 °CSIP: Steam-in-place 8 cycles for 60 min at 135 °C (Differential Pressure <30 kPa).
• Pack Size: Pack of 1
• Packaging: Individually packed in a double PE bag

Model Comparison